Product is no longer manufactured
DIVEZONE Michalak's radiator
  • DIVEZONE Michalak's radiator

DIVEZONE Michalak's radiator

€105.09
Out-of-Stock
Shipping from 20,00 €
Delivery methods
Delivery methods ×
Credit/Debit Card | PayPal | Bank transfer
DPD26 EUR
GLS26 EUR
Choose variant
Quantity

Out-of-Stock
We're confident we sell the very best diving equipment available, and we want you to share our confidence! That's why we back every sale with a 30-day money back guarantee. If you don't like the product, if it just doesn't work for you, return it. Within 30 days of receipt, products purchased from us may be returned for any reason.
(The product must not be used)
Read more
Every order over 299 EUR we will ship for free to any EU country. Buy today and feel safe with us.
Product withdrawn from sale. Not available for order.

The Michalak heater (GM) is designed to protect diving machines against the phenomenon of "freezing" of the second stage during dives in cold waters. An additional advantage is the reduction of energy loss by the diver, which is lost to heating in the lungs of the respiratory air. Heat loss is significantly reduced when using GM.DIVEZONE.PL

PRINCIPLE OF OPERATIONDIVEZONE.PLWhen using the regulator, the pressure of the breathing factor is reduced.If the cylinder pressure is 200at, after the first stage of the regulator, it decreases to a value of about 10-over at ambient pressure and then to ambient pressure after the second stage.According to the effect of Joul Thompson, at the pressure and temperature values ​​that we face when diving, the air temperature drop (at adiabatic) is about 0.17 ° C at a pressure reduction of 1 atm. This means that when the pressure is reduced by 190 degrees at the first stage of the regulator, the temperature drop can be around 32.3 ° C. Temperature drop at the second stage of reduction where the pressure is usually reduced by about 10 "only" 1.7 ° C. In fact, the conversion is not adiabatic and the temperature drops are not so critical. The higher the airflow through the regulator. Such a situation (increased flow) takes place when filling a jacket, dry suit, or when we breathe in two or more people, whether using an additional second stage (octopus) or using a single mouthpiece.Any increase in airflow from the cylinder reduces the temperature of the air leaving the first stage of the machine. The water temperature in our lakes is about 6 ° C at depths of 20m, even during the hot summer.The air cooled to several or several degrees below zero (this value is strongly dependent on the amount of gas flowing through) through the medium pressure hose, enters the second stage of the machine. The hose of the machine is made of rubber (heat insulator) the air is not able to warm up from the surrounding water (although the water has a positive temperature) The atmosphere in the can of the second stage of the respirator is moist, contains the breath exhaled from our lungs, and always some water. Together, these are sufficient factors to cause the formation of ice in a very sensitive place; between seat and valve plug of the second stage. The effect is not closing the valve of the second stage of the automaton, which initially manifests a constant second "outflow", going into a sudden, uncontrolled outflow of air often equal to the maximum expenditure of the machine. This is equivalent to the loss of the whole supply of breathing fluid in one minute or two. The Michalak heater is an efficient heat exchanger in which the air leaving the first stage of the machine warms up to a temperature close to the temperature of the surrounding water. As a result, the air entering the second stage of the machine does not have the effect of popping up. The second advantage of GM is that the air that the diver breathes is warmer than in a normal breathing machine, which increases the thermal comfort of the diver and reduces the sensitivity of the upper respiratory tract to a cold.In February 2004, at the request of the Underwater Technique, the Naval Academy, a team of specialists from the Department of Diving Technology and Underwater Works, AMW carried out laboratory tests of an ATX-50 respiratory machine by Apeks along with a GM heat exchanger.

The study contains 14 pages. The purpose of measurements:

  • determination of the unit respiratory work value of the Apex ATX 50 machine
  • determination of the unit respiratory work value of Apex ATX 50 machine during operation in cold water conditions
  • determination of the value of the set parameters of Apex 50 machine operation by Apeks together with the mounted
  • GM heat exchanger during operation in cold water conditions.

Measurements were carried out in two stages. The first stage involved the measurement of the unit operation of the ATX 50. The second stage is the measurement of the unit breathing work of the ATX 50 automaton with the mounted GM heat exchanger.The measurement was made at two depths H = 0 [m] and H = 50 [m] with ventilation RMV = 62.5 [l / min] (25 breaths at 2.5l per minute) with power supply 11.0-12.0 [ MPa]Results:

  • Apex ATX 50 machine without installed heat exchanger during freezing in cold water conditions has cooled in 21 minutes of work.
  • While the first symptoms of the ice of the ATX 50 automaton with the heat exchanger mounted appeared after 45 minutes of work.
  • ATX 50 machine breathing with a heat exchanger mounted at RMV 62.5 l / min on the surface increased by 0.62%, while with the same ventilation at a depth of 50m, respiratory work increased by 2.81% compared to ATX 50 without mounted GM heat exchanger.

MONTAGE We connect GM between the LP output. (medium pressure) first stage of the regulator and the tube to the second stage of the machine. Please note that the first stage must have an isolated water chamber. Otherwise, the low temperature of the first stage of the machine may cause the ice to appear in the spring space to set the interstage pressure of the first stage and prevent its proper operation, which will usually result in an excessive increase in interstage pressure and consequent constant expenditure or second-degree shooting. GM only protects one second stage of the regulator. If you want to protect the "octopus", an additional GM should be mounted on its tube.

ATTENTION!!!The breathing air must be "dry" (properly operated compressor), there must be no water in the bottle. When using humid air, ice may form on the filter or inside the first stage of the automaton, which will result in blocking the air flow (the machine will "cut" or "do not feed") or the effect of constant flow (if ice prevents the mushroom-nest assembly from working).

DIVEZONE.PL

You might also like

SCUBAPRO Regulator Bag + Computer Bag

SCUBAPRO Regulator Bag + Computer Bag

Regular price€43.69-10%Price€39.32
Lowest price: €39.27 0%
  • -10%
MIFLEX Inflator hose 65cm

MIFLEX Inflator hose 65cm

Price€33.53
    MARES Cruise Reg - Bag

    MARES Cruise Reg - Bag

    Regular price€30.88-15%Price€26.25
    Lowest price: €26.22 0%
    • -15%
    TECLINE Bag for regulator oval

    TECLINE Bag for regulator oval

    Price€46.33
      chat Comments (3)
      Grade
      No customer reviews for the moment.
      =