HI-MAX V17 Torch, foto/video 2200lm, auto-flash-off

Hi-Max V17 - It was created mainly for those divers who use a camera equipped with a flash underwater.

Photo / video flashlight 2200lm with the function of automatically switching off and on your light after detecting a flash from the flash.

V17 despite its high light intensity, it is really a small and shapely flashlight. It is great for transport in hand luggage. Its length is only 13.2 cm. The weight on the surface with the battery is 235g (under water 125g). The V17 coating has undergone hard anodization, which makes its surface resistant to scratches and abrasion. The back and front (grip) part of the flashlight has been knurled, which makes it easier to unscrew with a wet hand.

NOTE! V17 is equipped with overheating protection. If the temperature increases dangerously, the flashlight's light output will be reduced automatically.

Technical Specification of the Hi-Max V17 photo / video:

• Luminous flux 2200lm
• Light color 5500K
• Focus angle 90 °
• Push button switch
• Type LED CREE XP-L2 U2
• Approximate lighting time ~ 65 min
• Water resistant 100m
• Length / head / body 131/37 mm
• Weight 235g / in water 125g / flashlight with battery
• Power: 1 x 26650 battery
• Material aluminum
• Spare O-rings

Optics:

• 2 pcs LED CREE XP-L2 U2, 2200Lm, 5500K, 90 °, 65 minutes video light
• 3 pcs LED CREE XB-D 620 nm N4 - red light
• 3 pcs LED CREE XB-D 465 nm N4 - blue light
• 1 pc. LED, 400 Lm, 5 °, ~ 300 minutes - spot light
• 1 pc. flash detection sensor

The set includes:

• Flashlight Hi-Max V17,
• Battery 26650
• Charger
• wrist strap
• spare o-rings

Attention! We recommend that you use only original Hi-Max batteries to ensure that the flashlight works properly. Batteries from other manufacturers, even of the same type, may differ in structure and length and do not guarantee the correct power supply of the flashlight.

Staff:

Two buttons are used to set the operating modes and the light intensity. Their backlight (indicator) serves as an indicator of the battery charge and flashlight modes.

• Button No. 1 - closer to the light source
• Button 2 - further from the light source

Switching:

Press both buttons simultaneously for 1 second and then release them. The indicator lights up and the flashlight enters standby mode. Press button 1 quickly. The flashlight will turn on video light mode, 100% light output.

Disabling:

Press and hold both buttons simultaneously for 3 seconds.

Switching between V17 operating modes:

When V17 is on (lit), quick presses of button 1 can switch over the V17 modes:

• Video light
• Spot light
• Red light
• Red & blue light
• Blue light

Light brightness control:

When V17 is on (lit), you can switch after 3 levels of light brightness (in each V17 operation mode) by quickly pressing button 2: 100% → 50% → 25%

Function auto-flash-off:

When the flashlight is on (on), press and hold button 2 for 3 seconds. The indicator will blink and the V17 will enter the function of automatically switching off and on its light after detecting the flash from the flash.

Service function:

When the flashlight is off, press and hold both buttons simultaneously for 3 seconds. The service mode will be activated. With the button No. 2 you can switch modes:

short flashes → SOS → fast flashes.

Function Standby:

When the flashlight is on (lit), press and hold button 1 for 2 seconds, the flashlight will enter the standby function. Another 2-second press of button 1 will wake up the flashlight from this function.

Indicator:

battery level indicator:

• 100% – 80% blue color 80%
• 30% green color 30% - 5%
• red color <5% red, blinking.